See the effect of riding style
Consumption responds to current engine operation.
Fuel computer for EFI motorcycles
Fuel consumption and estimated range — even without a factory trip computer.
MK Fuel reads the injector signal and sends data to the app over Bluetooth. See fuel used, consumption and trip history while you ride.
✓ 3 wires✓ no ECU map changes✓ calibration support
Liveinstant consumption
After refuellingfuel used
On the roadestimated range
After the ridetrip history
Compatibility
Search the motorcycle database.
A ready profile speeds up setup. If your motorcycle is missing, request a new profile or enter the parameters manually in the app. MK Fuel works with ground-switched injectors.
Loading database…
⌕
✓
Starter profile found
- Capacity
- Cylinders
- Injectors
- Flow
These are starting values. Confirm the engine version, then calibrate after refuelling.
No ready profile found.
This does not necessarily mean incompatibility. Request a profile below or configure the parameters manually in the app.
Settings in the app
Use manufacturer or injector documentation. Incorrect values will affect the result.
Engine capacitycm³Cylinder count1–4Injector countszt.Injector flowcm³/minTank and reservelitry
If you do not know the injector flow, contact us before wiring the module.Request a motorcycle profile +
Product in use
One module. Useful data on your phone.
The module reads the signal, while the app organises ride, refuelling and motorcycle setup data.
Stop guessing
A trip meter tells you how far you rode. Not how much fuel you used.
A reserve light comes on late, and factory gauges can be inconsistent. MK Fuel adds another reference based on injector activity.
Track fuel since refuelling
The app totals calculated consumption as you ride.
Review your trip history
Distance, time and ride statistics remain in the app.
How the result is calculated
To be clear: it is not a fuel-level sensor.
MK Fuel reads injector pulse duration. The app converts it into fuel use and, after refuelling calibration, updates the result while you ride.
01Injectorcontrol signal
→
02MK Fuelpulse reading
→
03Bluetoothdata transfer
→
04Appresult and history
1×
Initial calibration when refuelling
Compare the reading with the actual amount refuelled. The app then uses your motorcycle profile.
Inside the app
From module pairing to ride analysis and calibration.
Real ride video
See MK Fuel during a real ride.
No animation or sample data. The recording shows how the readings respond while riding.
- instant and average consumption
- fuel used and estimated range
- GPS distance, time and speed
Installation
MK Devices
Built to solve a problem on a real motorcycle.
MK Fuel started because my own motorcycle lacked useful consumption and range information. After purchase, I help with the initial setup and calibration.
✓ designed and tested in Poland✓ help with the motorcycle profile✓ support after purchase
No fine print
Questions before purchase
Straight answers, including the limits of the device.
Does MK Fuel show the fuel level in the tank?+
It does not measure fuel level directly. It calculates use from injector activity, the motorcycle profile and refuelling calibration, then estimates range.
Does it change ECU maps or engine operation?+
No. The module reads the injector control signal and does not tune the engine or alter fueling.
Do I need to cut a factory wire?+
The signal can be tapped in parallel without cutting the factory wire.
What if my motorcycle is not in the database?+
A missing model does not automatically mean incompatibility. Send the motorcycle details so the engine version can be confirmed and starting parameters prepared.
MK Fuel
Ready to fit MK Fuel to your motorcycle?
Choose a variant and add MK Fuel directly to your cart.